According to inspection records: "10f. Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and." This type of violation requires correction to maintain food safety standards.
The examination revealed violations related to sanitation, which need to be addressed for proper compliance.
Food safety professionals regularly stress the essential nature of adequate sanitation procedures. As outlined in Food Safety Modernization Act, The FDA Food Code establishes comprehensive sanitation requirements that form the foundation of safe food service operations. These federal guidelines guarantee that restaurants adhere to strict health requirements.
Such infractions require attention for the business to maintain compliance with community safety standards. Public health officials note that addressing these violations helps maintain trust in dining establishments.
Health department officials will conduct a comprehensive re-inspection to ensure that all violations have been properly addressed. The establishment must demonstrate full compliance before the matter can be considered resolved.
This inspection emphasizes the fundamental necessity of strict regulatory adherence in dining establishments. Area customers have the right to access compliance documentation when selecting food service establishments.
Frequently Asked Questions
When was this inspection conducted?
This inspection was conducted on August 12, 2025.
Who conducted this inspection?
Chicago Department of Public Health
What violations were found during this inspection?
The following violations were found: 04H: Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan. | 10B: Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of. | 06C: Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor. | 05F: Insufficient or no hot holding, cold storage or cold holding equipment provided to maintain Time/Temperature Control for Safety Foods (TCS) at required temperatures | 08C: Pesticide not properly labeled or used by unlicensed individual. Pesticide, other toxic chemical improperly used/stored. Unprotected, unlocked bait station used. | 02G: Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation. | 05C: Food contact surface, refillable, reusable containers, or equipment improperly constructed, placed or maintained. Unacceptable material used. Culinary sink or other acceptable method not provided for washing food..
Why are these violations concerning?
Health code violations can increase the risk of foodborne illness. Common concerns include improper food temperatures (which can allow bacteria growth), inadequate handwashing facilities (which can spread germs), pest activity (which can contaminate food), and cross-contamination risks. These violations are monitored by health departments to ensure public safety and prevent foodborne illness outbreaks.