John & Joe Pizzeria & Restaurant in Morris Park Fails Health Inspection

JOHN & JOE PIZZERIA & RESTAURANT restaurant inspection

New York City, NY - Health inspectors discovered violations during an inspection of John & Joe Pizzeria & Restaurant on 08/05/2025.

The dining establishment functions from 749 Lydig Avenue Bronx Ny in Morris Park, a well-trafficked section of New York City recognized for its restaurant culture.

Advertisement

Health department documentation states: "02g. Cold TCS food item held above 41 °f; smoked or processed fish held above 38 °f; intact raw eggs held above 45 °f; or reduced oxygen packaged (rop) TCS foods held above required temperatures excep." Such infractions require correction to meet regulatory standards.

Among the findings were infractions involving temperature control, a key component of food safety protocols.

Industry research indicates that improper food temperatures can allow dangerous bacteria to multiply rapidly Research conducted by federal health agencies demonstrates that The FDA requires continuous temperature monitoring for all potentially hazardous foods in commercial kitchens. The FDA Temperature Safety Guidelines provides comprehensive guidance for preventing such violations.

Health department officials noted violations related to pest control, which require attention for public health compliance.

Restaurant industry studies show that pest-related violations often correlate with other sanitation deficiencies Data compiled by food safety institutions reveals that Effective pest control is considered a critical control point in preventing foodborne illness outbreaks. Per FDA Food Code Standards, such standards maintain that dining facilities comply with comprehensive protection measures.

Health department officials noted violations related to sanitation, which require attention for public health compliance.

Public health authorities continually highlight the fundamental significance of comprehensive sanitation practices. Studies from public health organizations show that Proper sanitation practices prevent cross-contamination and maintain the integrity of food preparation environments. The FDA Sanitation Standards offers detailed requirements for maintaining compliance.

Beyond regulatory requirements, such infractions may affect the restaurant's standing and customer relationships. Local food safety organizations monitor inspection results to provide information to the public.

Local regulatory authorities have ordered that John & Joe Pizzeria & Restaurant swiftly remediate the documented deficiencies before reopening to customers. Additional review is planned to confirm remediation.

The broader restaurant industry can learn valuable lessons from such cases, emphasizing the need for continuous vigilance to food safety standards. Consumer awareness remains a crucial component in maintaining community food safety.

📋 Complete Inspection Data

BUILDING 749
INSPECTION TYPE Cycle Inspection / Re-inspection
BBL 2043190050
Latitude 40.854465546464
CUISINE DESCRIPTION Pizza
INSPECTION DATE 08/05/2025
Longitude -73.865892004272
RECORD DATE 08/15/2025
Community Board 211
CAMIS 40377243
ACTION Violations were cited in the following area(s).
PHONE 7184099776
BORO Bronx
NTA BX49
STREET LYDIG AVENUE
Census Tract 022403
SCORE 61
ZIPCODE 10462
GRADE DATE 08/05/2025
Council District 13
GRADE Z
BIN 2049410
DBA JOHN & JOE PIZZERIA & RESTAURANT
VIOLATION CODES 02G; 10F; 06B; 02B; 04N; 02H; 04H; 06D; 04M; 08A; 06E
ALL VIOLATIONS 02G: Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation. || 10F: Non-food contact surface or equipment made of unacceptable material; not kept clean; or not properly sealed; raised; spaced or movable to allow accessibility for cleaning on all sides; above and underneath the unit. || 06B: Tobacco or electronic cigarette use; eating; or drinking from open container in food preparation; food storage or dishwashing area. || 02B: Hot TCS food item not held at or above 140 °F. || 04N: Filth flies or food/refuse/sewage associated with (FRSA) flies or other nuisance pests in establishment’s food and/or non-food areas. FRSA flies include house flies; blow flies; bottle flies; flesh flies; drain flies; Phorid flies and fruit flies. || 02H: After cooking or removal from hot holding; TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours; and from 70 °F to 41 °F or less within 4 additional hours. || 04H: Raw; cooked or prepared food is adulterated; contaminated; cross-contaminated; or not discarded in accordance with HACCP plan. || 06D: Food contact surface not properly washed; rinsed and sanitized after each use and following any activity when contamination may have occurred. || 04M: Live roaches in facility's food or non-food area. || 08A: Establishment is not free of harborage or conditions conducive to rodents; insects or other pests. || 06E: Sanitized equipment or utensil; including in-use food dispensing utensil; improperly used or stored.

Frequently Asked Questions

When was this inspection conducted?

This inspection was conducted on August 5, 2025.

Who conducted this inspection?

Chicago Department of Public Health

What violations were found during this inspection?

The following violations were found: 02G: Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation. | 10F: Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit. | 06B: Tobacco or electronic cigarette use, eating, or drinking from open container in food preparation, food storage or dishwashing area. | 02B: Hot TCS food item not held at or above 140 °F. | 04N: Filth flies or food/refuse/sewage associated with (FRSA) flies or other nuisance pests in establishment’s food and/or non-food areas. FRSA flies include house flies, blow flies, bottle flies, flesh flies, drain flies, Phorid flies and fruit flies. | 02H: After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours. | 04H: Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan. | 06D: Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred. | 04M: Live roaches in facility's food or non-food area. | 08A: Establishment is not free of harborage or conditions conducive to rodents, insects or other pests. | 06E: Sanitized equipment or utensil, including in-use food dispensing utensil, improperly used or stored..

Why are these violations concerning?

Health code violations can increase the risk of foodborne illness. Common concerns include improper food temperatures (which can allow bacteria growth), inadequate handwashing facilities (which can spread germs), pest activity (which can contaminate food), and cross-contamination risks. These violations are monitored by health departments to ensure public safety and prevent foodborne illness outbreaks.

Advertisement

📋 Data Sources & Health Guidelines

Inspection Data Source

All inspection data for this report is sourced directly from the New York City Department of Health and Mental Hygiene . View the original data source .

Federal Health Guidelines

Food safety standards referenced in this report are based on:

Important Note: This article is based on official inspection reports at the time of inspection. Current conditions may differ. Always check the most recent inspection results before dining. Establishments have the opportunity to correct violations and request re-inspection.