According to inspection records: "10f. Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and." This type of violation requires correction to maintain food safety standards.
The inspection found infractions involving temperature control, a fundamental aspect of food service operations.
Public health authorities continually highlight the fundamental significance of comprehensive temperature control practices. Studies from public health organizations show that The FDA requires continuous temperature monitoring for all potentially hazardous foods in commercial kitchens. The HACCP Temperature Monitoring offers detailed requirements for maintaining compliance.
The inspection identified violations related to pest control, an important area of food safety.
Public health authorities continually highlight the fundamental significance of comprehensive pest control practices. Studies from public health organizations show that Federal food safety regulations require all food service establishments to maintain comprehensive pest exclusion programs. The FDA Pest Control Guidelines offers detailed requirements for maintaining compliance.
The examination revealed violations related to sanitation, which need to be addressed for proper compliance.
Sanitation violations encompass a broad spectrum of cleanliness and maintenance issues that affect food safety Data compiled by food safety institutions reveals that Federal regulators use FDA sanitation guidelines as the benchmark for evaluating food service establishment compliance. Per Food Safety Modernization Act, such standards maintain that dining facilities comply with comprehensive protection measures.
The implications extend to broader community food safety standards. Health department data shows that correction of violations helps maintain community health standards.
City health officials have required that Los Munchies promptly correct these infractions before continuing food service. Re-examination will be conducted to ensure corrections.
Food service professionals should take note of important insights from these findings, highlighting the importance of ongoing compliance to health code requirements. Public education continues to be an essential element in ensuring public health protection.
Frequently Asked Questions
When was this inspection conducted?
This inspection was conducted on July 24, 2025.
Who conducted this inspection?
Chicago Department of Public Health
What violations were found during this inspection?
The following violations were found: 04H: Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan. | 10B: Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of. | 06C: Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor. | 02H: After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours. | 04N: Filth flies or food/refuse/sewage associated with (FRSA) flies or other nuisance pests in establishment’s food and/or non-food areas. FRSA flies include house flies, blow flies, bottle flies, flesh flies, drain flies, Phorid flies and fruit flies. | 15-37: Workplace SFAA policy not prominently posted in workplace. | 08A: Establishment is not free of harborage or conditions conducive to rodents, insects or other pests. | 02G: Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation. | 04L: Evidence of mice or live mice in establishment's food or non-food areas. | 10D: Mechanical or natural ventilation not provided, inadequate, improperly installed, in disrepair or fails to prevent and control excessive build-up of grease, heat, steam condensation, vapors, odors, smoke or fumes. | 10F: Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit..
Why are these violations concerning?
Health code violations can increase the risk of foodborne illness. Common concerns include improper food temperatures (which can allow bacteria growth), inadequate handwashing facilities (which can spread germs), pest activity (which can contaminate food), and cross-contamination risks. These violations are monitored by health departments to ensure public safety and prevent foodborne illness outbreaks.